| Let's make some trim to make things more
interesting! |
 |
| Using a L-N #66 beading tool I'm making a
fine bead on the edge of a 1 inch board. |
 |
 |
 |
| Once the bead is complete rip it off on the
band saw. |
 |
| I also made a base moulding on the router
table. Here is the profile. |
 |
| With the moulding complete it's time to
mitre and fit them to the saw till. |
 |
| Mitre the pieces on the table saw and then
glue and nail them in place. I nailed the base moulding through the bottom
so there are no visible nail holes on the show faces. |
 |
| Set the carcase aside to dry. Next the
lid... |
 |
| Mitre the bead and glue around the front
and edges of the lid. |
 |
| Hinge the lid with brass butt hinges.. |
 |
 |
 |
 |
 |
| A few coats of finishing oil, a coat of wax
and.. |
 |
 |
 |
 |
 |