|
Prepare the timber for the frame. I used 50mm wide stock |
 |
| Cut the mortises... |  |
| Cut the tenons on the table saw.. |  |
| and finish off with a hand saw |  |
| Rout the groove for the panel on the router table and dry fit. |  |
| Prepare the timber for the panel.... |  |
| Raise the panel on the router table and give it a final sanding.. |  |
| And the lid is ready. |  |
| Give the panel a coat of oil before you
glue the lid together. Now to fit the trim around the lid edges. |
 |
 |