Poplar for the drawers.

crosscut to width...

thicknessed...

set out...

dovetailed on the Littlerat....

dados cut fot the bottoms...

shellac the inside faces before assembly...

all ready for glue up.....

clamp 'em up!

Completed drawer

Screw the runners to the side and slide 'em in-job done!

Table glued up and in the clamps.

Applying oil finish to the zebrano drawer fronts and backs.

Applying first coat of oil/varnish.

6 coats applies and lightly rubbed out.

Looks good-water and heat proof, too!

Drawer fronts applied.

I overlapped the bottom edges of the fronts as drawer pulls.

In situ-another satisfied customer.

Figure of top-lots of swirling colours and the odd birds-eye.