| 5 sheets of 18mm MDF, kindly broken down by the nice chap with the panel saw in B+Q. Can't get full sheets in the back of my car........ |
 click
for larger picture |
| All panels cut to final size on the table saw. |
 click
for larger picture |
| Run rebates around the back and top edges
of the sides. I used the dado in my table saw but a router will do a great
job also. Then its glue and nails time! |
 click
for larger picture |
| Eight cabinets glues up and time for some
sealer. I started using a paintbursh...... |
 click
for larger picture |
| ....but bought a spraygun and finished them off in next to no time! |
 click
for larger picture |
| Units fitted into place-face frames to come. |
 click
for larger picture |
 click
for larger picture |
|
| Shelves fitted |
 |
| The doors are made from MDF with ply panels. Pocket hole screws at the corners hold them together-easily strong enough for their intended use. A few coats of paint and they will be ready to hang. Just the work top to finish. |  |
| Work top is complete (double layer of 18mm MDF) The radiator cover is all that's left. |  |